History of Art Music Essay

The change of phase from Baroque to Classical occurred in Europe between 1600 and 1750 had significantly affected music ideologies and expressions. During the Baroque period where counterparts and highly melodic structures of polyphonic sounds are employed, the classical period, on the other hand, utilized the effects of instrumental and solo-work in certain musical instruments especially on the piano and other keyboard instruments.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The clavichords and harpsichords, which precede the pianoforte and the modern pianos today, have made a significant impact on the quality and type of music produced during and between their inventions. These inventions and their further utilization were realized during the Baroque to Classical periods. For instance, the clavichord that was usually played alone in gatherings had been largely replaced by a harpsichord, which sounds like much similar to our modern piano—these instruments were essentially key players in genres and music prototypes in those eras. ROLES OF KEYBOARDISTS During the baroque period two genres emerged: sonata de chiesa (church sonata) and sonata de camera (chamber sonata). Since sonatas are usually accompanied by any string instrument such as viol ( a predecessor of violin), or cello, other keyboard instruments such as harpsichords can be seen in certain chambers. Thus, solo players or part players, as mentioned earlier can be variably noticed in musical audiences.   The basso continuo, where the melody is commonly accompanied by varied harmonies, was perfected. This is when; harpsichordists came into play, usually to improvise such harmonies and melodies. Yet, the roles of keyboardists were secondary than primary. Cellos, viols, violins or more frequently the lute or flure were the accompanying instruments in this basso continuos. Chamber music is not the predominant work field of the keyboard. Unlike in church music where, organ, as the major instrument, played significant parts in masses, services and the church music itself; harpsichords were not usually used.   As seen in the illustration below the common melody employed was realized higher notes or other forms rather than keyboard pieces. Perhaps, the non-use of this instrument in many basso continuous can be attributed to the thick texture and complex sound of other keyboards such as the organ. The Harpsichords and Clavichords are also somewhat polyphonic in effect with the sounds of strings on its mechanisms. Below is the sample where, a flute was used in a composition, Badinerie Suite no. 2 typifies this. The dawn of chordophones such as clavichords and harpsichord forced the early keyboardists to play using the available sounds and dynamics that early chordophones provide. The early harpsichordists or clavichordists usually lack the intensity in dynamics since, the pedals and the strings were almost heavy and no effect on dynamic structure can be totally and artistically achieved. Thus, playing the harpsichord or clavichord became a solo-piece performance (it was even considered house furniture), usually in homes of the elite rather than including the instrument in large ensembles (Burrows, 2006).   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The pianoforte, the father of the modern piano, had changed the way keyboard is played. The piano was used in ensembles that coordinate with the total harmony and polyphonic strength of the ensemble. While, pianoforte pieces were supported by strings to achieve the artistic expressions of a certain period, the keyboardists during the baroque era had not explored much on the variety and musical potentials of the piano.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The pipe organs, much popularly used in chapels and cathedrals were widely used but keyboardists using the organ, singly played the instrument. Consequently, the player usually employs himself in the church as organist than joining an ensemble. This made the organ almost a single instrument played than adjoining it in an orchestra.   The reason for this is rather physical than musical. Organs, especially the pipe organs are attached to large balconies of churches than other handy instruments in an orchestra. The bulk structure cannot be of use to courts where symphonies were usually arranged. On the textural aspect, organs are somewhat polyphonically sounding with trains of sounds verging simultaneously; thus if included in an orchestra   it will greatly affect the harmony and cadence in an orchestra play. It can be very much assumed that keyboard players assume the role of a single player than a team player musician in an ensemble.   One major and leading keyboardists and vocal master is Johann Sebastian Bach. His operas and organ work largely determined the success of keyboard playing. Later, his works on the organ for instance â€Å"Toccata in F, from BWW 540† is one great example of recitative expression of a single instrument—that in organ. This work exemplifies that during his period—the baroque, where he flourished, the use of single-man keyboard playing was a typical role. In fact in compositions in early baroque, employed only parts for keyboards in sonatas, especially those of Scarletti. However, the latter employed much of strings than keyboards. The keyboardist in the baroque period usually plays as a part-player or a contributor to achieve the musical piece requirement such as solos in ornate baroque orchestral compositions. But since, baroque music typifies the grand structures even in melodies, the assumption of keyboardists are largely in parts than seen doing solos. During the middle of the baroque period, operas were in its foundational stage, and in ensembles, keyboards played secondary roles to the grand operas being established that time. Thus, this contributed to the less prominence in compositions and focus on keyboard instruments, much less to the keyboardists.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The use of keyboards in more symbolic and serious music was not contemplated; in fact, harpsichords were used in dances during its invention. Francois Couperin is one of those leading keyboardists who effusively experimented keyboards in his compositions, â€Å"Ordres†. This has become the structural base of certain French dances, commonly played in German and English settings. CHANGES IN KEYBOARDS: PIANOS Cristoforis and harpsichords are the early versions of keyboards. While many keyboards exist during the baroque period, chordophones such as pianos, were the only significant instruments that had gained certain prominence. Fortepianos, a prototype of the modern piano today had not made any significant contribution to the world of keyboard playing, since it was immediately replaced by a more complex sounding-machine—the modern piano. Modern pianos were only invented during the early mid-baroque periods, thus compositions for the single piano and pianos with orchestras are usually not common. The early musicians such as Handel, for instance, never really explored keyboards because during his time pianos and other forms of keyboards were not the main instrument in musical scenarios. Instead, classical and dramatic polyphonic structures of vocal prowess were extensively used to maximize the tonal harmony and musicality. Notice that, while the keys are almost the same, musical effe cts are different. Clavichords in many respects are totally different in mechanism, in comparison with the sound of harpsichords. And the latter, has a very distinctive sound than that of a modern piano. Carl Philippe Bach is one who used clavichord sufficiently, slightly deviating from his father Johann Sebastian Bach, who revolutionized the artistic and harmonic sensitivities of an organ.   Francois Couperin, on the other hand, a great French musician and keyboardist influenced the use of harpsichords to the latter piano masters in integrating the playfulness of keyboard keys.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The great virtuosos such as Mozart, Haydn and Beethoven used in number of scores piano pieces to show their musical artistry. But only the modern piano, because of its complexity and ability to be bent on musical artistry and be confined in musical elements, received much recognition and acceptance. This later on leads to development and creation of various musical compositions exclusively for the piano. Chopin, Dvorak became household names for the use of virtuostic piano effects and melodies.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The early physical developments of keyboards have dampened, for some time, or even stunted the growth of texture and sustaining power of piano music during its early invention. As noticed, clavichords or harpsichords do not have many pedals on them to sustain sounds in longer time periods, as it is required. Thus, fewer sustaining effect on the melody can be heard from an early pianoforte, compared to the modern pianos nowadays. A notable comment was given by Charles Rosen: â€Å"Instrumental changes since the eighteenth century have made a problem out of the balance of sound in †¦ all chamber music with piano†¦.The piano, in turn, has become louder, richer, even mushier in sound, and, above all, less wiry and metallic. This change makes nonsense out of all those passages in eighteenth-century music where the violin and the piano play the same melody in thirds, with the violin below the piano. Both the piano and the violin are now louder, but the piano is less piercing, the violin more. Violinists today have to make an effort of self-sacrifice to allow the piano to sing out softly †¦ The thinner sound of the violin in Haydn’s day blended more easily with the metallic sonority of the contemporary piano and made it possible for each to accompany the other without strain.†Ã‚   (Rosen 1997, The Classical style, p. 353) ADAPTION OF COMPOSITIONS DURING THE CHANGES   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Perhaps the greatest adaptation of musicians during the changes in keyboard structure and sound quality is the creation of solo work for keyboards. Sonatas were created that clearly emulsified the sound of singe instruments such as pianos. For instance, Haydn made numerous piano sonatas, total of sixty-two to exemplify the work on piano. However, earlier keyboard sonatas, particularly for the organ by Johann Kuhnau were created to give life to the single instruments. The changing physical features of the piano and other keyboard instruments had made the piano an isolated musical instrument. However, sonatas and concertos for the piano never end, Bach in Part II of the Well-Tempered Clavier (BWV 870-893), is one such example that though keyboards like organs were not part of chamber music, expressed that keyboard music can be complete in itself. Isolation of these instruments had been one of the solutions as form of adaptation to the physical changes.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The changes in sounds and quality had pushed several composers not to consider the keyboards in many of symphonies and compositions with orchestra. Concertos however were created also especially for organs, pianos, harpsichords to adopt and singly bring out the best music of such instruments without compromising the quality of the orchestra in general. The general temperaments in music and its complexities also greatly changed with the improvisations of sounds and experiments done by musical geniuses. Bach made several attempts to adapt the keyboard to the changing times of baroque to classical.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The diminishment of counterpoint and polyphonic structures as discussed was the central figure of baroque music which was partly decreased in use during the classical period, made also serious effects on keyboard music. The monodic forms, where keyboards are only accompaniments, placed the players on the background rather than the forefront of musical scene.   While Gluck, Bach, Haydn and other late baroque composers have significantly made contributions to the prominence of the keyboard music such as harpsichords, clavichords, organs and pianos. Only the classical era made the first giant leap to put to pedestal keyboard instruments particularly the piano (Rosen, 2002). This can be attributed because during the baroque period, keyboards had not yet been perfected. Later,   great masters such as Chopin, Dvorak, Lizst and Debussy of the Classical era elevated the piano and other keyboard instruments to the level of the elite harmonic quality, and explored the endless possibilities of this instrument. WORKS CITED and PICTURE CREDITS. Good, E. (1982) Girrafes, Black Cragons, and other Pianos: A Technoligical History from Cristofori to the Modern Grand. Stanford, CA. Standforn University Press Hanning, B.R. (2002) A Concise History of Western Music (2nd edition). New York: W.W. Norton & Co. Rosen, C. (1997) The Classical Style, 2nd ed. New York: Norton. Baroque Period. Wikipeda, Free Encyclopedia, from Wikipeda Online. Retrieved May 10, 2007 from Encarta Encyclopedia, 2006. J. S. Bach’s Badinerie Suite No. 2 (sample score). Encarta Encyclopedia, 2006. Clavichord photograph by H. Deutsch. Encarta Encyclopedia 2006. Harpsichord photograph by Encarta (photograph credits cited above) Wikipeda Free Encyclopedia. Photograph and outprint source of Well-Tempered Clavier, credits cited above. Encarta Encyclopedia, 2006. J. S. Bach’s Badinerie Suite No. 2 (sample score). Rosen, C. (2002) Beethoven’s Piano Sonatas: A Short Companion. New Haven: Yale University. Burrows. Baroque Music. Encarta Encyclopedia. USA: Encarta History of Music and Piano. Wikipeda Free Encycolpedia, from Wikipeda Online, retrieved May 10, 2007,website:< http://en.wikipedia.org/wiki/Piano_history_and_musical_performance†>   

Final Reflection on Community Service Learning Essay

A) The name of the agency was Thomas House Temporary Shelter and its mission is to provide a safe, supportive environment and resources necessary for homeless families with children to remain together while empowering them to become independent and self-sufficient. Their program also includes transitional shelter, case management, counseling, life skills development, employment assistance, resource assistance, children’s program, graduate extension program. At this agency, my role was to help young residents or children to succeed in school. I was to provide tutoring for homework help and any other academic work given by the agency. B) At this agency, it gave me a chance to develop educational relationship with children and to cooperate with other volunteers to successfully aid children with their studying. I never had a chance to teach a child before this community service but after teaching them, I was surprised how much I enjoyed working with them. This volunteering experience definitely improved how I will work with children in the future. C) In terms of putting myself to this community placement, it gave me a perspective on my own life to appreciate what I have and the family support that I received. Lots of children residing at the shelter experience abusive family relationship and poverty, which has a negative affect on their mental health. Just knowing what these children had to go through made me realize that I had it a lot better than they did and it taught me to be more thankful for what I have. Socially, by being part of this Thomas House Shelter agency, I was able to learn to be more approachable and out reaching to people. Emotionally, I was content that I can help out these children to better them. Intellectually, I felt smarter to be able to teach children when I have never taught children before. Lastly, professionally, I was able to remain professional relationship with the coordinator that was in charge of the shelter. D) Honestly, in the beginning of service learning, I had doubts about service learning and was expecting not much from it. However, by volunteering at the Thomas House Shelter agency, I was able to meet my service learning goals. I was able to enhance children’s self-esteem and confidence by complementing on their accomplishments. I was also able provide needed assistance to the children while complying with coordinator’s directions. I also learned about what single parent/mothers go through and what we can do to help them to establish a better family. Overall, the whole experience was meaningful and helpful to meet my service learning plan goals. E) As a result of my placement, I was able to positively influence children on education that it can be challenging. For example, one child that I was teaching was really smart but did not like to show that he was capable of doing hard problems. It seemed like he gets easily distracted and was not interested in showing his abilities to do problems. In order to get him involved with work, I had to encourage him and compliment how good he was at math. Then, he got more involved and he was finally able to tackle some problems that he was not interested before. In my opinion, I was able to encourage children in this community that were not encouraged before. F) In terms of CSL enhancing the understanding of the course material and making abstract concepts real, I really learned a lot about single mother parenting and poverty issues. The majority of the single parents at the shelter were mothers that were taking care of the children. From the text book, it stated that majority of single parent mothers are from minorities and at the Thomas house shelter, it certainly supported the statement. There were mostly African American single parents and Hispanic or Latino single parents residing at the shelter. There was only one White single parent residing at the shelter out of 15 or more families. It is a sad fact but minority women are the ones suffering the most from single parenting issues. G) The most difficult part about volunteering at the shelter is the working hours and number of volunteers working at the shelter. The volunteer starts at 5:00 PM and it would take me around 40 minutes to get to the shelter from school. Distance wise is no t that far but traffic is the cause for a long commute. Another difficulty that I faced is that there are too many volunteers so that I had to compete with the volunteers in order to make connections with the children. If I had a chance to have one on one relationship with a child, I would be able to make better connection in terms of child and a teacher relationship. The most satisfying aspects of my community work are that working with children and seeing them improve their grades in school. Even though these children are going through poverty and hard time, in the end they are the same children as any other children. They love to have fun and goof around and experiencing these children just made me a better person and content about myself. H) For the future CSL students, I high recommend volunteering for children if you never have. This was my first time working with children and it taught me the importance of teaching and family aspect of life. These kids are bright and fun, so if you learn to work with these kids to positively influence their life in a right path, it will give you a surreal feeling of accomplishment by working with them.

Assess at least four different sources of data that could be used in a Research Paper

Assess at least four different sources of data that could be used in a digital forensic investigation - Research Paper Example In addition, discussion will also be helpful for network administrators in understanding different aspects of computer forensics, which will help them in ensuring greater security of their organizations strategically. Before assessing the topic, it is very essential to understand the definition of digital forensics that has been under the process of acquiring recognition due to dearth of research in the area and due to lack of awareness about importance of digital forensics in today’s competitive world. Briefly, forensics is the process in which experts utilize scientific means and skills to collect and analyze evidence that then can be submitted in the court for legal purpose (Kent, Chevaller, Grance, & Dang, 2006). In this regard, digital forensics is a newly-born discipline that is gradually acquiring its importance as a formal area of study that deals with scientific knowledge in collection of evidence from different sources of data related to computers that involve deskto ps, laptops, routers, CCTV, network hubs, logs, software, time packages, emails, etc (ENFSI, 2003). It is very imperative to understand that since digital forensics is a new area of study that is still under the process of standardization, therefore, discussion in this paper related to different sources of data might not be the final word. Thus, it will take further study and investigation to reach to a conclusion in terms of prioritizing these sources in terms of their utilization in different events/incidents. In addition, from a technical perspective, it is also essential to understand that besides assessing different sources of data, it is equally important to ensure fulfillment of primary goal of digital forensics that is about preservation of the identified data source. It has been an observation that investigators usually are able to identify important data sources; however, they overlook preservation of the sources that results in unacceptable of evidence in the court. SOURC ES OF DATA As mentioned earlier, digital forensic investigation has been divided into different stages of preservation, collection, examination, and analysis (ENFSI, 2003). Collection stage is relevant in this paper as it involves identification and collection of information pertinent to the case under investigation. In case of usual forensics, everything is a source since investigators are able to gather information from people and acquire fingerprints from clothes, furniture, floors, etc. However, when it comes to digital forensics, information is usually available in computers of computerized equipments, such as phone logs, web traffic, packet sniffers, network records, etc (ENFSI, 2003), and therefore, it is usually not possible to take away the whole equipment, and investigators have to collect the information while ensuring complete preservation. In digital forensics, besides four stages, one can categorize the stage of collection in two parts. Firstly, investigators collect b ackground evidence that refers to the data that is usually available and stored for usual organizational purposes (Sheldon, 2002). On the other hand, investigators also come across

DNA Fingerprinting Essay Example | Topics and Well Written Essays - 1000 words

DNA Fingerprinting - Essay Example These four bases pair with each other in a unique manner i.e. Adenine-Thymine and Guanine-Cytosine to form the unique DNA structure of every living thing. These bases are also attached to a sugar backbone that twists and turn in a double helix manner and give the molecule of its shape (Crocket 2001). Implications DNA fingerprinting, as the name implies is a technique used for the purpose of identification in many fields of science. Since fingerprints of not two individuals have been found to be similar, it has been proved that just like fingerprints, DNA sequence of every individual is also different and identity of a person in many cases can be found out by using this technique. Although many moral and ethical issues have been raised on the use of this technique but it has been found to be very helpful in the identifying individuals in many cases where it was almost impossible to attain hundred percent identity mainly because only remains of individuals were found or in mass disaste rs where the bodies were totally destroyed that obtaining fingerprints was almost impossible. For example in a mass disaster, the DNA samples of the relatives i.e. parents, siblings or offspring of the victims are taken and then the DNA sequence is matched with that of the victims and identities are generated on the basis of matching of base pairs. Also DNA fingerprints have been used in solving the cases of disputed paternity, identifying a rapist in cases of sexual assault and identifying the species in cases of fragmentary remains. Types and Techniques: The three main types of DNA Fingerprinting are: RFLP (Restriction Fragment Length Polymorphism) VNTR (Variable Number Tandem Repeats) STR ( Short Tandem Repeats) RFLPs are the oldest type of DNA fingerprints. For this process, a sample from any part of the body is collected since all the nucleated cells of the body contain DNA. After the sample is collected, DNA is extracted from the sample by using restriction enzymes(Crocket 200 1). Restriction enzymes are highly specific enzymes for specific sequences of DNA and they act on and cleave only the sequences they are programmed for. After the DNA samples are properly extracted, specific band patterns are generated in agarose gel by using the process of Electrophoresis. This is a process in which electric current is applied to each side of the sheet containing the extracted DNA on a sheet and movement of particles is observed which creates a band pattern (Burke 1991).  Ã‚  

Anger ( Psychology Assignment) Assignment Example | Topics and Well Written Essays - 1500 words

Anger ( Psychology ) - Assignment Example In these regards, the article begins with situating anger within the Freudian context. It argues that Freud believed anger represented a defense mechanism to protect a fragile ego that was under siege from an outside attack. The article argues that while Feud’s contention has some bearing to reality, that to comprehend the true nature of anger one must go beyond these articulations. This is a notable point in that it indicates that Freud’s early articulations of anger as rooted in ego defense is too simplistic a means of understanding that human condition, and that rather than speaking of it in terms of ego, one must embrace a more complex articulation of personality. In these regards, the article argues that one must understand the expansive nature of personality construction and realize that anger oftentimes masks emotions an individual is feeling elsewhere in their life. Anger is then understood as a sort reactive, secondary emotion in these regards. For instance, on e can consider the nature of anger in the contextual situation of driving and getting cut-off in traffic. Within this context the initial emotion experienced by the individual was that of fear and the secondary reactive emotion was anger. In these regards, the predominant understanding of anger is the type of emotion that is reactive rather than an initial and instinctual emotion. One of the critical issues in examining anger in these regards is developing a workable definition of what constitutes anger. In these regards, the article advances a notion of anger as a protective emotion. The article’s contention is that when individuals experience anger it is out of a sort of survival instinct that is triggered by external circumstances. These circumstances then function by sending signals to the heart and internal organs and senses such that they alert the individual to the potential threats in the environment. While there are a great variety of things that can cause anger to o ccur, the two most overarching concepts in these regards is the current vulnerability as well as the extent of the individual’s perception of this vulnerability. It’s argued that the core assumptions of the nature of anger are such that they necessitate varying types of definitions. One such of these is problem anger, which indicates that the individual acts out of vulnerability to such an extent that it hinders their long term goals or interests. The article indicates that this is generally a temporary and short-lived occurrence that is brought on by a sudden shift in core value. This then result in the individual lashing out in angry ways towards those or the incident that caused their malaise. The article also addresses means of overcoming these sorts of problem anger situations by indicating that the individual should refrain from immediate action and enter a contemplative state of affairs. A more insightful insight in such a context is that when an individual find s themselves in such a state must act in accordance not with their feelings of anger, but with their long term goals. While the article makes interesting insights into the nature of human anger or consciousness, in large part one questions the overriding validity of the claim. For instance, the argument that there is an element of angry that is known as problem anger is seems more likely suited

Different Products and Factors which Affect their Demand and Supply Assignment

Different Products and Factors which Affect their Demand and Supply - Assignment Example Similarly, any decrease in the price of a commodity will increase its quantity demanded that will result in an extension of demand i.e. movement along the same curve towards a higher level of quantity demanded. Any other factors other than price which affects the demand for a product will result into a change in its demand at every level; hence the whole demand curve will shift from its original position and will operate on a new demand curve formed on the basis and magnitude of the change. Some factors which affect the demand for a product are changes in the income level of a person, changes in the distribution of income, advertising, and marketing of the product, consumer’s taste, fashion or trend, credit facilities associated with the product, the price of substitute goods and complementary goods etc. Any changes are population are also considered to be a factor which influences the demand, however, it is considered to be a long-term factor, any changes in a population usua lly occur over a large period of time. The market for convenience foods is expanding rapidly even though there are various programs and efforts directed to inform the people about its adverse effects on human health. Some people believe that it contains a lesser amount of nutrients and a higher amount of fats, preservatives, taste enhancers etc. Despite the concerns associated with it, the demand for convenience food is on the rise as the quality or taste of the food and female employment has increased. More people are attracted towards these nearly ready-to-eat meals as they feel it saves time and is more convenient than usual cooking. The market for convenience foods is expected to expand further which means there will be further increases in its demand, this could be due to different factors such as a change in taste, fashion, lower price, higher quality etc. The price of good always plays an important role in determining what quantity will be demanded by the consumers. The price of convenience foods is expected to decrease as newer and efficient factors and methods of production are been used.

UAL global business strategy Essay Example | Topics and Well Written Essays - 3500 words

UAL global business strategy - Essay Example main unclear; of course, there are certain principles, which, if they are applied, are likely to increase the chances for a firm’s success in the global market. Current paper examines the various phases of development of the global strategy of United Airlines; the examination of the firm’s environment led to the assumption that changes are required on certain parts of the firm’s operations – in order to ensure that the targets set by the firm’s leader will be achieved. The expansion of the firm in the global market is expected to successful – under the terms highlighted in the paper; the need for potential changes is also analysed taking into consideration the fact that competition in the specific industry is strong and the effort for entering the global market would require additional support – referring especially to the allocation of monetary resources for the funding of the firm’s plans in the international market. United Airlines was established in USA in 1926; the firm is considered as one of the first of its industry – in the USA market. Through the decades the firm managed to achieve a high growth; however, the event of the September the 11th led to severe financial losses – the firm losses for the 2001 were estimated to $2.1 billions. In 2002 the company asked for the financial support of the government in order to control its debts and achieve a gradual recovery. In 2002 the firm’s financial problems were made more intensive; then, negotiations with employees were considered as necessary – the firing of employees was not avoided. The stability of the firm has been set in risk; however, through the years the firm managed to improve its performance; today, the number of the firm’s employees are estimated to 46,602; in accordance with the Report on the First Quarter of 2010 results, the firm achieved an operating profit of $58 millions in the first quarter of 2010; moreover, the company ranked first in many categories reflecting

OPERATIONS MANAGEMENT Essay Example | Topics and Well Written Essays - 2500 words - 1

OPERATIONS MANAGEMENT - Essay Example Introduction An organization could only be considered dynamic if it’s operational and it’s performing. The quality of the operation will influence its competitiveness and express its influence in the market to leverage. Part of 1 of this paper is some annotated bibliography on performance management and the second part is a company analysis. Theme 1. Annotated Bibliography Arnason, R., (2009). Fisheries management and operations research, European Journal of Operational Research, Elsevier, vol. 193(3), pages 741-751. Author is a scholar specializing his study on the aquatic reserves and who was challenged to evaluate the fishery industry anent to some deep-rooted problem on economic inefficiency e.g. blaming on inappropriate social institutions which control fishing management and common property development. Author argued the needs to replace the existing institutions that can provide appropriate leadership and management attune to the ideal social objectives of fisher ies. While author recognized the singular objective of fishing industry which is to maximize the present value and benefits from fisheries but empirical realities on the ground showed variegated, conflicting and interests of groups within the industry. Arnason contended that it’s more appropriate to embrace a multi-objective programming system with such management regime that is inclusive of (1) fisheries management system, (2) enforcement and (3) fisheries policies. This system, for him, should be correlated to the cost required in fisheries management and its value of harvest. Author further acknowledged that there ought to be a balance in fisheries management with cost efficiency amid multidisciplinary issues to ensure that managers are able to perform the necessary tasks necessary to have effective produce. Holsapple, C. W. & Lee-Post, A. (2010). Behavior-based analysis of knowledge dissemination channels in operations management, Omega, Elsevier, vol. 38(3-4), pages 167- 178. Authors are scholars taking serious interests on analyzing the behaviors about how knowledge is disseminated in operation management. Both contended that the significance if this discipline is vital for knowledge dissemination through journals, magazines, books, and other online sources for information that are supportive or are exploring more about the significance of operational management, which may include surveys, analyses. Though the study was quite limited by scope and resources utilized to fit the needs of the researcher, however, the examination of behaviors as explicated in the resources used was able to explicate the three metrics for rating publications for operational management studies. Researchers believed that the metric can be utilized by those who are working to determine which OM journals or books uphold substantial relevance. Galindo, G. & Batta, R. (2013). Review of recent developments in OR/MS research in disaster operations management, European Journal of Operational Research, Elsevier, vol. 230(2), pages 201-211. Researchers are scholars who have serious interests in reviewing the developments in OR/MS studies focused on disaster operation management. They affirmed that as disaster impacts to large number of populace and create serious environmental damages, the devastating effects inspire interests on scrutinizing the disaster operations management are undertaken using the studies of Nezih Altay and Walter

Gutai art Research Paper Example | Topics and Well Written Essays - 3000 words

Gutai art - Research Paper Example Thus, this revolutionary movement was initiated. Gutai artists produced artworks which completely revolutionized the traditional Japanese art through the convergence of ordinary materials and their own bodies1. In 1956, there was a declaration written by Yoshihara which expressed the beauty which is fascinated and raised from something after it gets damaged. However, this process was known as the process of damaging and it revealed the inner life of the material. The movement included the artwork which relied upon this manifesto and many artworks of the artists were the evidence of how the appearance of the object changed as it damaged over time. The damage and destruction was caused to the object usually in a course of centuries and it was also described as the beauty of decay. The artists of this movement had a rather different vision towards this movement. Their main aim was to create a relationship between art, body, space and time through their artwork. The revolutionary Gutai m ovement had started in Japan almost ten years after the World War II had ended. The roots of the Gutai movement went back to the Oriental tradition but also covered some aspects from the Western art. The Western art was, later, also influenced by the evolution of the Gutai movement. ... Yoshihara had also declared that the liberal position of the people was however the most important message which was conveyed through this art movement2. The people who were living in the Japanese chaotic and desperate society at that time were the group of people who were focused in this movement. The artists believed that the liberal position of these people is very important because freedom is a major source for human development. Through the artwork promoted by this movement, the position of the people was described as free. Thus, the artists of the Gutai movement were together to uncover the realities of the society in order to overcome the intense situation. As described by the artists and seen in the artwork, the features of the movement had emerged from the concepts of portraying the relationship between the materials and the artist’s body. The most influencing type of art which was presented by this movement was the performance art because it expressed many of the mes sages using newest techniques. In the initial years, the movement had received great attention from the European world but eventually the art lost its importance. The Gutai movement had become less influencing by the 2000’s, was criticized and looked over. The Western art did not find it an influencing movement but later it was influenced and understood its importance. The traces of Gutai ideas and expressions are seen in the western art as they were accepted with appreciation and praise. The main characteristic and important feature of the Gutai movement was the contribution of the artists. These artists had worked together to give a new face to the world of art. They created a unique combination of totally opposite aspects which were experimentation

What are the strengths and weaknesses of seeing organizations as Essay

What are the strengths and weaknesses of seeing organizations as purely rational configurations - Essay Example In simple terms, a rational society system entails specificity of objective and formalization. Objective plan provides guiding principle for particular tasks to be accomplished along with a regulated allocation of resources whereas formalization endeavored to standardize managerial behavior. The aim of rationalization is the end former bureaucratic way of running organizations. The anatomy of the bureaucratic regime was characterized by well-structure line of command, specific job regulations, division of labor, impersonality, etc. (Bennis, 2001). These are the specific areas that rationalization confronts, and all through the approach has been facilitated by innumerable strengths in rationally configured organizations. However, there has not been anything as absolute or â€Å"pure† rationalization, for even Taylor- the founder of rationalization did not declare any purely or absolutely rational society (Mackenzie-Gonzalez, n.d). Rationalization has also drawn some prevalent weaknesses. In this essay, I seek to analyze the strengths and weaknesses of organizations perceived to rationally configured together with journey of rationalization. In this regard, the areas to be considered include rational human replacement with technology, perception of rational managem ent and linear system, rational predictability, and the rational calculability. In order to have a coherent understanding of the discussions of the weaknesses and strengths of perceiving an organization as purely rational, it is paramount to describe the journey the rationalization process. The organization in the past was characterized by bureaucracy and as it is well illustrated by Weber’s typology of an organization. In particular, Max Weber was apprehensive with what he regarded as the most rational structure of the organization, the bureaucracy, and the influence embedded in it. He then noted that bureaucracies, preceding the industrialization,

Sample and population Essay Example for Free

Sample and population Essay Three samples were used for this study. Sample one consisted of two schools serving grades K-2; each school was from a different district. Sample two consisted of two schools which served K-3 and were from two separate districts. Finally, the third sample consisted of four K-5 schools, from two different districts. Overall, seven districts and eight schools of different sizes in the state of Mississippi were compared. The study specifically seeks to identify variables in low performing schools that could hinder them from improving performance. In order to provide an accurate study, the researcher took samples from different sized schools with different student demographics. Implementation Research was conducted by recording data for each school for a side-by-side comparison of different factors (see Appendix). All factors were found through greatschools. com, which summarizes each school’s characteristics for easy research. All school samples were then analyzed for the reading achievement average. Based on the average, the researcher then examined the achievement factors; determining whether there was a trend between any of the achievement factors and the MCT results of the chosen school samples. Factors compared during analysis were; socioeconomic status (SES), student-per-teacher ratios (FTE), and the percentage of nonwhite students. The MCT scores for 2005 were used as an indicator of overall reading proficiency of the chosen school. In order to determine whether a variable was a consistent influence on the MCT scores, three consecutive years of MCT scores from 2003-2005 were analyzed. The overall study aimed to discover a consistent pattern between a variable, such as SES or FTE, and the level of reading proficiency. Data Analysis Two of the three samples were consistent with the researcher’s hypothesis that SES is a strong influence on reading proficiency. Sample 1 however was uncharacteristic of the other two. In Sample 1, both schools demonstrated above the state average in MCT reading scores, however, the school with the highest SES percentage actually did better. This is uncharacteristic since Sample 2 and Sample 3 demonstrated a trend in high SES and low MCT scores for three consecutive years. As discussed in chapter two, the literature review, the influence of class size on student achievement has been an on going debate among researchers. For this reason, the researcher included student-per-teacher ratios as a sample variable. The researcher had expected to see some evidence of FTE influence reflected in the MCT scores; however, that was not the case. According to the data collected, the FTE of all three samples ranged between fifteen and seventeen, with the state average being fifteen. The results demonstrated no reoccurring trend between FTE and MCT scores. Sample 1 schools demonstrated varying above average MCT scores and the same FTE of seventeen. In Sample 2, School 1A demonstrated a below average MCT score with a FTE of fifteen; however, 2B had higher test scores and a higher FTE. In Sample 3, all but one of the schools had a FTE of Seventeen, 3B demonstrated a FTE of fifteen and a below average MCT score. School 4B had below average MCT scores but a FTE of seventeen, like the remaining two schools with higher MCT scores. Between all three samples, there was no reoccurring trend between MCT scores and FTE. The researcher had expected student ethnicity to play a large role in student achievement levels, however based on this studies samples, there was little proof that such a trend existed. As demonstrated in Appendix A through C, schools demonstrating low achievement scores varied in the percentage of nonwhite students. The same variations were found in schools with high achievement scores. Overall, the only achievement factor that demonstrated a trend was the socioeconomic status factor. SES as a factor of achievement was present in Samples 2 and 3, but seemed irrelevant in Sample 1. Based on the results and the uncharacteristic trends found in Sample 1, the researcher feels that the quality of the curriculum and teaching strategies had an influence of the high achievement levels found in Sample 1. The researcher feels strongly that SES is an influential factor on the reading achievement of elementary students in Mississippi. It must be noted however, the influence of SES can be minimized with the proper curriculum and learning strategies. MCT scores give educators insight into the overall achievement levels of students, and should be used as an indicator of what type of teaching strategy should be used. There are numerous ways to improve student achievement. Educators and school administrators must be aware of the learning abilities and potentials of students and gear curriculum and teaching strategies towards the needs of the students. References Achieve (2001). Standards: How high is enough? Achieve Policy Brief, 3. Washington, DC: Author. Allen, J. (2001).Eliminating a â€Å"Yes, But† Curriculum. Principal Leadership, 2, 2, 10-15. Balfanz, R. Legters, N. (2001, January). How Severe is the Problem? What do we know about intervention and prevention? Report presented at Dropouts in America, Conference of the Harvard Civil Rights Project and Achieve, Inc. : Cambridge, MA. Balfanz, R. , McPartland, J. , Shaw, A. (2002, April). Re-conceptualizing extra help for high school students in a high standards era. Preparing America’s Future: High School Symposium, Washington, DC. Campbell, J. R. , Hombo, C. M., Mazzeo, J. (2000). NAEP 1999 Trends in academic progress: Three decades of student performance (NCES2000-469). U. S. Department of Education, Office of Educational Research and Improvement. Cronnell, B. (1984). Black-English Influences in the Writing of Third- and Sixth-Grade Black Students. Journal of Educational Research, 77(4), 233-236. Retrieved October 27, 2006, from Questia database: http://questia. com/PM. qst? a=od=95818457 Chubb, J. E. , Moe, T. M. (1990). Politics, Markets and America’s schools. The Brookings Institution. Washington D. C: Codding, J. (2001). An Up Ramp for Struggling Readers. Principal Leadership, 2, 2. 22-25. Committee for Economic Development (2000). Measuring what matters: Using assessment and accountability to improve student learning. New York: Author. Coleman, J. S. , Campbell, E. Q. , et al,.. (1966). Equality of educational opportunity. : U. S. Department of Health, Education, and Welfare. Washington D. C Commonwealth of Australia, (2005). Executive Summary. Retrieved December 1, 2006 from: http://www. dest. gov. au/nitl/documents/executive_summary. pdf. Deutsch, F. M. (2003). How small schools benefit high school students. NASSP Bulletin, 87. 35-44. Education Digest. (2002). Still Stumped Over School Size. pp. 31-3. Everson, H. T. , Dunham, M. D. (1996). Signs of success: Equity 2000—Preliminary evidence of effectiveness. The College Board. ERIC Document Reproduction Service, No. ED 455, 109. Fields, C. F. (1997). An equation for equity: Maryland’s Prince George’s County puts Equity 2000 to the test. Black Issues in Higher Education 13, 26. 24-27, 28-29, 30. Finn, J. , Achilles, C M. (1999). Tennessee’s class size study: Findings, implications, misconceptions. Educational Evaluation and Policy Analysis, 21, 97-109. Fischer, C. (1999). An Effective (and Affordable) Intervention Model for At-risk High School Readers. Journal of Adolescent Adult Literacy, 43, 326-35. Folger, J. , Breda, C. , Beach, S. A. , Badarak, G. (1989). Evidence from Project Star About Class Size and Student Achievement. PJE. Peabody Journal of Education, 67(1), 17-74. Retrieved October 27, 2006, from Questia database: http://questia. com/PM. qst? a=od=95763060.

Nationalism and the origins of The first world war Essay Example for Free

Nationalism and the origins of The first world war Essay When global war broke out in 1914 dreams of world peace and prosperity were shattered. Accordingly, the First World War was arguably one of the most traumatic episodes in the history of international affairs. Geopolitically speaking, the First World War (also described as WWI in this essay) was unprecedented in both scale and sheer loss of human life. Never before had the world witnessed such carnage and violence perpetuated through the use of modern technology. The First World War touched much of the world and the implications of this conflict reverberated across the globe. Seeking to understand the historical explanations as well as the role that nationalism played in the outbreak of the First World War, this essay will explore the multiple causes of the development of global hostilities in 1914. Using a three pronged analytical model, the causes of the WWI will be discusses with reference to the pre-conditions and precipitants for conflict and the triggers which sparked the war. Understanding that WWI was an international event with global repercussions, we will analyze the various antecedents for the emergence of armed conflict through a multi-causal approach. This essay will argue that a variety of factors led to the outbreak of the First World War and while there is not one single causal explanation for the emergence of global conflict in 1914, a proper explanation of the origins of this conflict takes into account the amalgamation of each of these factors. While nationalism was an important factor leading to the outbreak of international conflict between the warring parties, this essay will argue that in fact, nationalism was an important precursors to the emergence of conflict but the sole and deciding force in the violence which erupted on the shores of Europe and reverberated across the planet. Although the First World War has recently been overshadowed in the aftermath of the WWII, this conflict was the first in terms of scale and sheer destruction and thus continues to be worthy of scholarly analysis. Nationalism in International Affairs Nationalism is an important force in international relations and has been so for centuries. As a basic principle of the international order, concepts of state sovereignty are intrinsic to our understanding of the world system. Accordingly, the international system is predicated upon the existence of nation-states and nationalism is a belief or sense of identity within the nation. The Treaty of Westphalia established the principle of state sovereignty, another fundamental principle of the international order which established the nation-state as an autonomous political entity. Similar to tribalism or a sense of social kinship, nationalism as a potent political force began in Europe in the late eightieth century and was connected with a decline in overall religiosity, the development of industrialization, Enlightenment thoughts and a concerted effort by political elites to â€Å"build states†. By inculcating a sense of nationalist fervor in the citizens of their respective countries, elites have been able to manipulate nationalism for political purposes. Mass mobilization towards a variety of specific causes through an appeal to nationalist sentiment has been used as a political tool for centuries. Although not exclusively a negative force, nationalism remains an important ordering principle of the international system and a force to be reckoned with (Anderson 2006). Preconditions to the Outbreak of Conflict There were a variety of preconditions to the emergence of the conflict, which up until that date, had been the largest that the world had ever seen. The First World War represented the dueling alliances of the Triple Entente composed of Britain, France and Russia – and the Triple Alliance – comprised of Germany, Austria-Hungary and Italy. Pre-conditions are best described as the precursors to conflict and there were many underlying long-term causes for the belligerent behaviour of the states of Europe in 1914. An arms race, underway for years, and growing at a rapid pace just prior to the emergence of the First World War set the stage for violent conflict between the major states of the region. Accordingly, the arms race occurring at the time exacerbated the global balance of power and led to an increased likelihood of aggressive behavior between the armies of Europe. As the European armies grew and competed with one another for size, manpower and prestige, the naval race between German and Britain contributed to a partition of the major states of the continent into two opposing camps. Competition was surely facilitated by nationalist tendencies and a desire to counterbalance the political, diplomatic and military ambitions of one’s rival. In addition to international arms races, domestic pressures and a willingness of the part of the citizens of some countries to engage in war helped precipitate the conflict. Accordingly, the diplomatic isolation of Germany, Austro-Hungary was another important contributor to the outbreak of global war in 1914. German nationalism, largely ignored in the settlement of the Congress of Vienna almost one hundred years before, did experience a resurgence particularly after the imposition of what was then conceived by many to be an unfair Treaty in Vienna and gained prominence in the middle to late nineteenth century and early twentieth century. Accordingly, a German nationalism movement led a revolution to unify the country in 1871 – a similar movement in Italy served to unite that country in 1861 – and remained an important, although not solely important, force in attempting to explain the preconditions of conflict in 1914 (Joll and Martel 1992). In addition to the pre-conditions above, a series of crises from 1904-1914 also helped pave the way for the emergence of the First World War and were important pre-cursors to this conflict. The First Moroccan Crisis from 1905-1906 resulted in a German offensive which created the Entente. This was followed by the Bosnia-Herzegovina Crisis of 1908/1909 in which Austria-Hungary formally annexed Bosnia-Herzegovina. This important precursor to future conflict forced Russia to reevaluate its geopolitical situation and in turn view Germany and Austro-Hungary as a potential threat. The Second Moroccan Crisis (1911-1912) united Russia, Britain and France against Germany and was an important stabilizer for the Triple Entente informal alliance. The final conflicts which were important pre-conditions to the outbreak of violence in 1914 were the Balkan Wars 1912-13. These series of wars removed the Ottoman Empire from the equation and led to an impressive German arms build-up (Strachan 2001; Joll and Martel 1992). On the Cusp of War: Precipitants to Conflict Precipitants are short-term crises that made the war seem inevitable and a series of crises, beginning with the assassination in Sarajevo of Franz-Ferdinand, Archduke of the Austro-Hungarian Empire, made large-scale war in Europe seem like an inevitability. In fact, the months of late June/early July were replete with crises beginning with the violent assassination in Serbia of the Archduke of the Austro-Hungarian Empire. Assassinated on Serbia’s national day by a violent terrorist organization, the Black Hand, this event alone is described by many observers of the First World War as perhaps the most monumental precipitant to the outbreak of hostilities between the major powers of Europe. Following his violent death at the hands of a Serbian nationalist, Germany unilaterally supported the right of the Austro-Hungarian Empire to respond as it saw fit. This led to successive increases in belligerence on both sides and an ultimatum by Austria-Hungary to Serbia (Strachan 2001; Joll and Martel 1992). Triggers and the Outbreak of War There are a variety of direct antecedents to the War of 1914 and the following will describe the important triggers for the world’s largest military mobilization to-date in the aftermath of the assassination of Franz-Ferdinand, Archduke of the Austro-Hungarian Empire. While there is not one single event which explains the emergence of large-scale conflict, the following will chart the important triggers which led to the internationalization of conflict and the explosion of a truly global war. Serbia’s rejection of the ultimatum put forth by the Austro-Hungarian represented a desire on its part to safeguard its independence. By rejecting the Austro-Hungarian ultimatum and seeking Russian support, the Serbian republic unwittingly set the stage for the bloodiest war the world had ever known. Serbian intransigence and refusal to acquiesce to the demands of Austria-Hungary set the stage for Russian involvement which internationalized the conflict and significantly increased its scope. At the time, the Russian army was the largest army on the planet and the inclusion of Russia into the dispute significantly increased its scope and explosive potential. Following the introduction of Russia into the equation, the first four days of August 1914 proved to significantly expand the horizons of the conflict. During those first few days of the month, Germany declared war on Russia and its ally France, leading to the mobilization of Britain and the further internationalization of belligerence. Germany’s decision to declare war on Russia and the Entente powers represented an important expansion of the conflict on the side of the Triple Alliance and set the stage for the mobilization and later involvement of Britain in the brewing hostilities (Strachan 2001; Joll and Martel 1992). Origins of the â€Å"Mass War† and Nationalism At the outbreak of World War One, states mobilized what scholars have described as â€Å"mass wars†: the uniquely modern phenomenon of warfare developed in the twentieth century which required the wholesale diversion of economies, labour and national productivity towards the war effort (44). Accordingly, â€Å"from 1914 on, wars were unmistakably mass wars†¦such a level of mass mobilization cannot be maintained except by a modern high-productivity industrialized economy. † (Hobsbawm 1994). State apparatuses grew and â€Å"mass wars† required governments to mobilize people, resources, and armaments to serve the war effort. Citizens were conscripted to fight, industry was instructed to produce arms, and the government became intimately involved in the establishment of monopolistic war economies. Although nationalism did play a role in the establishment of war economies and the growth of military-industrial complexes built up to support the war effort, many factors account for call to arms and the descent into extreme bloodshed and violence during the First World War. Mass mobilization towards the war effort was certainly helped by nationalist fervor as the belligerent parties prepared for conflict which until then would have been on an unimaginable scale, but as has been shown above, nationalism is just one part of the equation in attempting to explain the origins of the First World War (Hobsbawm 1994). Concluding Remarks As one of the most traumatic episodes in the history of the world, the First World War represented geopolitical conflict on an unprecedented scale. Never before had the world witnessed such carnage, bloodshed and violence. Seeking to understand the historical explanations and discuss the role that nationalism has played in the outbreak of the First World War, this essay has explored the antecedents for conflict in 1914. Important preconditions, precipitants and triggers have accounted for the emergence of this conflict. Nationalism, although an important factor which can help explain the emergence of World War One, is actually only one aspect of the overall conditions which lay the groundwork for World War One. Nationalism may be a guiding principle of the international order but a focus which exclusively explores the role of nationalism in the causes of war gives an incomplete picture of this global conflict. While nationalism may have been a force in the establishment of alliances in Europe, there were a handful of other preconditions, precipitants and triggers which led to this conflict. As this essay has shown, many factors led to the violent episode now known as the Second World War and while each factor differed in substance, each contributed to the emergence of the â€Å"War to End All Wars†. REFERENCES Anderson, B. 2006. Imagined Communities. New York: Verso. Hobsbawm, E. 1994. Age of Extremes: The Short History of the Twentieth Century: 1914-1991. London: Abacus. James Joll, J. and G. Martel. 1992. The Origins of the First World War. New York: Longman. McEvedy, C. 2003. The New Penguin Atlas of History. New York: Penguin. Strachan, H. 2001. The Oxford Illustrated History of the First World War. London: Oxford University Press.

Warrington Environmental Pollution and Soil Health Risks

Warrington Environmental Pollution and Soil Health Risks Report on the environmental pollution and human health risks of soils in the former industrial area of Woolston, Warrington. 2.Introduction: As a result of rapid population growth followed by intense industrial activity and petrochemical development soils have suffered from contamination with substances of various origins (E.M.Garcia et al,2015).As a result of rapid industrialisation of cities such as Manchester, newly constructed canals were built all over the UK in order to increase trade as well as the exportation of goods. In the 1820s, a new canal was established along the river Mersey with the purpose of shortening the route of navigation through the meandering Mersey. 3.Study site. According to Warrington borough council, the New Cut Canal was opened in 1821. This 2km long canal was built in order to improve the Mersey and Irwell navigation by creating a shortcut for barges carrying goods between Liverpool and Manchester. Historical ordnance survey maps from 1907 show an adjacent chemical works, a large tannery, a slaughter house, a metal works and a gunpowder mill. Sustained industrial activity meant that the canal sediment was undoubtedly polluted by spillages from ships and industrial effluents (Hartley and Dickinson,2010). Following the establishment of the Manchester shipping canal the New Cut Canal began to decline until it was left derelict (Warrington borough council) and eventually the Canal was disconnected from the river and abandoned in 1978 (Hartley and Dickinson,2010). In that year, it was decided that the site was to be used for tipping under emergency procedures to deposit road construction rubble (Hartley and Dickinson ,2010). Following this history, it has been estimated that the site contains 9800 tonnes of polluted anoxic sediment. It is known that this polluted sediment contains elevated levels of TPHs (Total Petroleum Hydrocarbons), PAHs (Polycyclic Aromatic Hydrocarbons) followed by highly elevated concentrations of metals (Pb, Zn, Cu, Cr and Ni) and Arsenic (As) (Hartley and Dickinson,2010). 4.Methods: 4.1. Methods out in the field. 4.1.1 Soil samples To determine the degree of soil contamination at the site, soil samples were taken at various points along the New Cut Canal site. It was decided that a systematic sampling method would be used in order to record an adequate amount of data for the investigation. This sampling method had been chosen as it allowed one to determine the spatial pattern of contamination whilst limiting human errors (O1). Whilst at the site, transects had been established along the New Cut Canal site. Transects were established along a 700-metre stretch of the canal and each transect had been separated by 70 meters. In total there was 10 transects and along each transect,6 soil samples were taken approximately every 10 meters from the Northernmost point of the canal to the southernmost point closest to the river Mersey. Soil samples from each sampling point were taken just below the surface but in order to prevent large organic materials from interfering with the soil investigations later it was decided that each sample should be taken and the large organic matter (Roots etc.) should be removed. This was done using a measuring tape and a spade. The soil samples had been gathered in plastic bags. 4.2. Conductivity and resistivity values within the soil surrounding New Cut Canal. 4.2.1. Electrical Resistivity Imaging (ERI) using ERT (Electrical Resistivity Tomography) The ERI was used to show the potential mobility of trace and toxic metals within the soil by analysing conductivity data from the ERT and the EM-31. Conductivity measurements were taken using an ERT along a single transect measuring 35 metres between the New Cut Canal site and the river Mersey. The ERT takes conductivity measurements through a series of electrodes which are placed into the ground. Once these electrodes had been implanted and connected to each other via multi core cables a current was then injected into the ground through these electrodes and as the current passed through the soil resistivity measurements were taken. Changes in conductivity reflect variations in subsurface materials and higher conductivity readings are associated with higher metal concentrations in soil pore waters. Figure 1: Below is an image that shows the standard setup of ERT. In this investigation the electrodes were inserted into the ground at distances of 2 meters apart. The transect of electrodes covered an area between the New Cut Canal and the river Mersey and was carried out at an angle of 0 ° (North to South). Image from Terra Dat:   http://terradat.co.uk/survey-methods/resistivity-tomography/ 4.2.2. Geonics EM-31 Ground Conductivity meter ERT maps out the geological variations associated with changes in conductivity (Exploration instruments) as well as the EM-31. Unlike the ERT, the EM-31 gathers its readings by creating an electromagnetic field in the air using a coil wire which is separated from a receiver coil by 3.66 meters. The transmitted energy propagates into the subsurface where a second electromagnetic field is created due to the effect of soil moisture, conductive earth materials and other buried objects (Reynolds international,2011). The EM-31 is useful to this investigation as it can take conductivity measurements below 2 meters of the Earths surface. The data collected by both the EM-31 and the ERT could then be combined to determine changes in conductivity up to a depth of 3-4 meters. 4.3. Soil sample experiments in the lab 4.3.1. Determining total metal concentrations Following the onsite extraction of soils samples, they were then taken to the lab for further processing. Before any more investigations were conducted the soil samples were dried in an oven at 40 °C for 48 hours in order to remove all of the moisture.   Oven drying the sediment is crucial in this type of investigation as one can only compare the dry weight to the Soil Guideline Values (SGVs) (DEFRA, 2002). Once they had been dried, the soil samples were then processed further in order to analyse the total metal concentrations (Pb,Zn,Cr and As), bioavailability of those metals, organic matter content and soil pH. Soil samples were then sieved so that larger particles greater than 2mm in diameter were removed.   After the samples had been sieved, analysis of the bioavailability of metals was conducted. 10g of sieved sediment was then added to a conical where 50mL of 0.5mol acetic acid was added using a measuring cylinder. Once the acid was added the flask was sealed with Parafil m and placed onto an orbital shaker for 30 minutes. Whilst the samples were shaken, 2 30mL universal sample tubes were prepped (2 for every sample) and a Whatman no 1 filter paper was added to each of the tubes. After the cylinder samples had been shaken, they were left to stand for 10 minutes in order for the contents to settle (Beneficial to the investigation as it sped up the filtering process). Following 10 minutes, the supernatant liquid in the cylinder was then added into the universal sample tubes through the filter paper. Once one of the tubes was full the second one was then introduced to the filtering process. Eventually both universal tubes were sealed and then analysis of the metal concentrations was conducted by Atomic Absorption Spectroscopy (AAS). 4.3.2. Determining organic matter (OM) content Secondly, organic matter content needed to be measured, this was done using the loss on ignition method. This process began with the weighing of an empty porcelain crucible (W1). Soil was then added until it filled the crucible and was then weighed (W2). The air-dry weight was then determined by using the following calculation W2-W1. The minute that this was done the crucibles for each of the samples was then oven-dried at a temperature of 105 °C overnight and then placed in a desiccator the following morning. Afterwards, the samples were then measured again (W3). The crucibles were then placed into a muffle furnace and ignited at 450 °C for 8 hours and left to cool on a sand tray. After this, the crucibles were weighed again (W4). This was done to burn off any of the Organic Matter (OM) content. Muffled weight was then determined by using this calculation, W4-W1. The final method involved a simple calculation, shown below: OM content (% of dry sediment) = [oven dry weight (g) muffled weight (g) / oven dry weight (g)] x 100 4.3.3. Determining soil pH To begin with 10g of soil was added to a beaker using a spatula where it would then be mixed with 25mL of deionised water using a measuring cylinder. The beaker was then stirred well until all of the material had been suspended (To allow the contents to mix) shortly followed by a 15-minute period whereby the beaker was left to stand. Following the 15-minute period a pH strip was dipped into each of the samples. Using a pH reference card, the colours recorded on each of the pH papers was noted. 4.3.4. Determining Total (T) metal concentrations using XRF (X-Ray Fluorescence Spectroscopy) Finally, 10g of each sample was added into a small plastic bag and then shaken until all of the soil reached the bottom. The bag was then placed onto the test bed and then the XRF machine determined the % values of Pb, Zn, Cr and As. 5. Results 5.1. Figure 2: The table below shows all of the data collected from the field as well as metal concentrations in mg/kg-1 for each of the soils samples. OM or organic matter was measured in grams. Total Chromium concentrations when analysed however the concentrations were too low when measured using X-Ray Fluorescence Spectroscopy (XRF). SiteID x y OM pH PbT ZnT CrT PbB ZnB CrB A1 363081 389035 4.66 5.50 29.00 199.00 nd 0.01 12.71 0.21 A2 363081 388969 14.81 5.80 15.00 80.00 nd 0.09 1.90 0.20 A3 363087 388919 15.28 6.00 20.00 130.00 nd 0.01 11.95 0.26 A4 363064 388867 6.26 4.70 645.00 417.00 nd 2.44 35.99 0.45 A5 363070 388823 10.67 4.50 40.00 205.00 nd 0.18 5.87 0.17 A6 363079 388737 8.76 4.50 58.00 299.00 nd 1.05 19.16 0.04 B1 363137 389021 23.24 5.00 178.00 32.00 nd 0.41 26.42 0.18 B2 363139 388973 6.83 5.00 79.00 16.00 nd 0.01 0.01 0.18 B3 363140 388941 7.02 5.00 126.00 24.00 nd 0.01 5.37 0.16 B4 363145 388882 13.11 4.70 128.00 27.00 nd 0.01 9.92 0.11 B5 363160 388808 10.16 4.70 96.00 26.00 nd 0.30 10.23 0.15 B6 363186 388731 13.57 4.70 184.00 32.00 nd 0.00 9.57 0.18 C1 363196 388941 9.10 4.70 73.00 21.00 nd 1.55 8.20 0.22 C2 363194 388975 10.60 5.00 107.00 19.00 nd 0.01 11.02 0.31 C3 363185 389022 11.20 5.00 79.00 24.00 nd 0.15 10.72 0.24 C4 363205 388828 13.10 4.70 75.00 20.00 nd 0.01 9.09 0.12 C5 363201 388854 8.90 4.70 93.00 20.00 nd 0.26 11.13 0.12 C6 363187 388888 9.60 4.40 95.00 24.00 nd 0.01 8.71 0.16 D1 363251 388969 7.51 6.10 126.00 298.00 nd 0.69 61.88 0.41 D2 363250 388965 10.55 5.80 111.00 278.00 nd 0.01 17.75 0.20 D3 363256 388999 11.45 5.50 109.00 312.00 nd 0.16 18.38 0.16 D4 363247 388907 12.92 6.10 32.00 45.00 nd 4.75 36.60 0.37 D5 363250 388898 9.32 5.00 34.00 56.00 nd 4.50 25.35 0.30 D6 363252 388887 3.86 4.40 23.00 32.00 nd 4.59 27.91 0.34 E1 363398 388984 7.70 5.50 38.00 298.00 nd 0.52 21.28 0.17 E2 363389 388997 8.90 5.90 55.00 433.00 nd 0.21 25.96 0.22 E3 363380 389003 5.60 5.10 38.00 532.00 nd 0.01 3.60 0.15 E4 363445 388929 11.20 4.50 21.00 56.00 nd 0.11 0.01 0.09 E5 363444 388919 11.90 5.10 19.00 48.00 nd 0.58 0.42 0.09 E6 363447 388907 12.10 5.20 33.00 63.00 nd 1.22 5.42 0.14 F1 363519 388982 9.77 5.80 33.00 225.00 nd 2.01 11.29 0.63 F2 363510 389010 11.16 5.50 22.00 134.00 nd 0.37 16.08 0.35 F3 363512 389029 5.70 6.50 55.00 489.00 nd 0.07 23.22 0.17 F4 363519 388973 6.89 5.00 37.00 220.00 nd 1.75 16.22 0.58 F5 363525 388946 6.18 4.70 21.00 80.00 nd 0.01 0.01 0.14 F6 363533 388923 6.75 4.40 20.00 52.00 nd 0.01 2.59 0.12 G1 363573 389056 21.17 5.80 43.00 287.00 nd 0.00 13.66 0.41 G2 363564 389032 12.76 5.50 45.00 289.00 nd 0.01 10.49 0.44 G3 363561 389022 8.53 7.00 32.00 212.00 nd 0.09 9.90 0.34 G4 363564 389001 8.32 5.00 23.00 176.00 nd 0.07 2.10 0.15 G5 363559 389022 6.67 4.70 21.00 76.00 nd 0.05 2.30 0.17 G6 363569 388965 8.35 4.70 19.00 34.00 nd 0.03 2.10 0.18 H1 363685 389056 6.26 6.50 1047.00 1639.00 nd 16.57 49.79 0.67 H2 363674 389036 2.22 5.50 49.00 1156.00 nd 0.17 38.15 0.22 H3 363669 389016 3.01 5.30 46.00 153.00 nd 8.73 23.47 0.44 H4 363632 388981 4.96 5.00 23.00 77.00 nd 0.24 2.97 0.06 H5 363631 388971 7.34 5.00 31.00 143.00 nd 0.46 6.01 0.11 H6 363632 388959 4.84 5.00 48.00 78.00 nd 2.44 0.64 0.13 I1 363697 389018 21.17 5.80 32.00 819.00 nd 0.74 40.06 0.39 I2 363703 389044 12.76 5.50 51.00 483.00 nd 1.65 32.53 0.60 I3 363694 389078 8.53 7.00 32.00 202.00 nd 2.10 25.27 0.81 I4 363718 388982 8.32 5.00 23.00 91.00 nd 0.48 9.23 0.12 I5 363720 388981 6.67 4.70 19.00 68.00 nd 0.01 0.01 0.05 I6 363723 388978 8.35 4.70 31.00 126.00 nd 0.01 7.46 0.09 J1 363775 389003 6.26 6.50 33.00 224.00 nd 2.22 26.49 0.80 J2 363770 389053 2.22 5.50 24.00 104.00 nd 0.01 0.37 0.13 J3 363767 389104 3.01 5.30 36.00 401.00 nd 0.40 25.69 0.33 J4 363771 388972 4.96 5.00 24.00 176.00 nd 0.01 10.96 0.18 J5 363771 388973 7.34 5.00 23.00 128.00 nd 0.01 11.93 0.19 J6 363772 388970 4.84 5.00 17.00 79.00 nd 0.01 4.30 0.09 Figure 3: The image below shows the spatial pattern of Lead (Pb) contamination across the New Cut Canal site. The image was created using Arc Map software. It is clear that the highest levels of Pb were found around sample site A3-5 and H1-2. Figure 4: The image below shows the spatial pattern of Zinc (Zn) contamination across the New Cut Canal site. The image was created using Arc Map software. Based on the spatial image, it is clear that the highest levels of Zn were found around sampling sites H1 and H2. Figure 5: The image below shows the spatial pattern of pH levels across the New Cut Canal site. The image was created using Arc Map. The most acidic pH readings were located towards the Southwest of the site whereas pH readings in the Eastern part of the sampling site increased to a pH of 5.3 and above. Figure 6: The graph below represents the changes in the Total (T) metal concentrations of various metals as well as indicating how bio available these metals are in the area. Figure 7: The stacked column below allows one to determine the bioavailability of Zinc as a percentage when compared to its total (T) metal concentrations for each of the sample sites. Upon observing the data, it is clear that (in terms of percentage) Zn bioav

Hostage Rescue :: essays research papers

Hostage Rescue As a terrorist, your role in a hostage rescue level is to prevent counter-terrorists (CTs) from leading the hostages from where they are being held to the hostage rescue zone. Terrorists win hostage rescue rounds by eliminating the counter-terrorist force while preventing them from rescuing hostages. CTs win a round by finding the hostages and leading more than half of them to freedom. CTs can get the attention of a hostage by moving near him then pressing their ‘Use’ key (see Controls, Use). The hostage will now follow the CT back to the rescue zone. If a CT wants the hostage to stop following, they need to press ‘Use’ again and the hostage will stay put. Sometimes when you have a group of hostages following you, they may block you into an area; you can push them out of the way by simply walking into them. CTs can also win a round by eliminating the terrorists. Bomb/Defuse In a bomb/defuse map, the goal of the terrorist is to plant a C4 bomb in the designated area then prevent the CTs from defusing the bomb. Players must remember to stay well clear of the bomb when it explodes, as it has a large and deadly blast radius. The bomb is randomly assigned to a terrorist at the start of the round. Team members can identify the bomb carrier by the backpack they are wearing and the player with the bomb will see an icon on their Heads Up Display (see HUD, bomb carrier). To plant the bomb, the carrier must be in the vicinity of the bombing target. While having the bomb as their currently selected item, the player must then press and hold their fire key (see Controls, Fire) for three seconds for the bomb to be planted. The bomb will go off after a set period of time has passed (45 seconds by default). The level is won by the terrorists when the bomb explodes (maximum payoff) or if the CT team is eliminated (smaller payoff). CTs can win a defuse map in two ways: by defusing the bomb or by eliminating the Terrorists (if the Terrorists managed to plant the bomb before being eliminated, CTs must still defuse the bomb to win the round). To defuse the bomb, CTs must stand near the bomb, target it then press and hold their ‘use’ key until the bomb is defused.

Impact of the Internet on Business in the Middle East Essay -- Informa

New online consumer behavior in the Middle East and globally demands changes in corporate strategy Internet usage that involves online collaboration, networking between individual users, and user-created content - known as Web 2.0 - is growing rapidly and is changing the way companies in the Middle East operate, a new Booz Allen Hamilton study has found. Consumers no longer visit the Internet to passively take in content; rather, they are actively creating content themselves. 'In this new era of interactivity, corporations must be aware of what is taking place on the Internet and in social media spaces like MySpace, Wikipedia, and Second Life. They also must decide how to participate in this new world. They must develop a strategy to address the threats posed by Web 2.0 and seize the opportunities it offers. This is equally true for corporations operating in the Middle East, where Web 2.0 sites have a dedicated following,' said Jad Hajj, an associate with Booz Allen Hamilton, a global management consulting firm with offices throughout the MENA region. He added that companies also may need to change their business models to better fit the new online environment. 'Those that ignore the growing trend of Web 2.0 usage do so at their own peril,' he warned. To understand the full scale of Web 2.0 activity and learn how it might affect consumer behavior, Booz Allen conducted a first-of-its-kind study to investigate trends in Web 2.0 usage, including social behavior and networking, usage of communication and Internet services, and customer expenditure. As part of the study, 4,570 individuals in the Middle East, Germany, the United Kingdom, Brazil, and the United States were surveyed between August 2006 and January 2007... ... certain populations. For example, companies that want to target professionals may choose to advertise on LinkedIn, a business-oriented social networking site, whereas companies targeting the youth market may advertise on FunkySexyCool, a mobile-oriented social network run in cooperation with MTV. Customer service Web 2.0 platforms offer companies the ability to create very interactive high-quality customer service sites that network together customers, staff, and suppliers. In addition, companies can create customer service sites moderated by full-time employees that encourage end-user created content and wide participation among users - enhancing consumers' customer service experience and building loyalty. Branding There are increasing opportunities to brand companies on Web 2.0 sites, also at a much more favorable cost than through other media channels.

Measure for Measure Essay: Lord Angelos Hypocrisy -- Measure for Meas

Lord Angelo's Hypocrisy in Measure for Measure      Ã‚   Within ‘Measure for Measure’ Shakespeare presents the notion that mankind's corruption is not necessarily born by power, but rather already innate in humanity. Shakespeare argues that power is not a producer of corruption by presenting the Duke, who holds the most power, as a moral hero, and conversely revealing the corruption of the powerless class (through characters like, Pompey, Mistress Overdone, and Barnadine).   Shakespeare uses Lord Angelo in Measure for Measure to show that corruption is innate within mankind whilst Angelo is a symbolism for pharisaical fanaticism in the play.       It's interesting to note that Lord Angelo's name evokes an image of purity and holiness.   Names are given at birth, and the idea that he is called angelic from the start, would argue against this doctrine of innate depravity.   But, as Shakespeare argues, it's a name that can't be lived up to because of natural passions and lusts, which ultimately leads to Angelo's hypocrisy.   The play opens up not only dressing up Angelo with a pure name, but also as a puritanical deputy, who has been "elected" to enforce the laws while the Duke is away.   This idea of "election" not only signifies the political decree of Vienna, but also a Pauline doctrine that relates to men and angels.    Angelo has done an efficient job at fooling people into believing that he is incapable of natural vices. When the Duke announces the decision to give Angelo authority, Escalus, the good lord, applauds the choice: "If any in Vienna be of worth, To undergo such ample grace and honor, It is Lord Angelo". Angelo has done such an efficient job he has even fooled the lower class into thinking that he is pu... ...ne of Shakespeare's solution to this innate problem is not to run off and join a monastery (or a convent, as Isabella attempts to do); but rather to accept the inborn human vices and try to lead good lives in spite of them.    Works Cited and Consulted: Black, James. "The Unfolding of Measure for Measure." Shakespeare Survey 26 (1973): 119-28. Leech, Clifford. "The 'Meaning' of Measure for Measure." Shakespeare Survey 3 (1950): 69-71. New American Standard Bible. Reference ed. Chicago: Moody Press, 1975. Shakespeare, William. Measure for Measure. The Arden Shakespeare. Ed. J.W. Lever. London: Routledge, 1995. Thomas, Vivian.   The Moral Universe of Shakespeare's Problem Plays.   London: Croom Helm, 1987. Wilders, John.   "The Problem Comedies."   In Wells, Stanley, ed.   Shakespeare: Select Bibliographical Guides.   London: Oxford UP, 1973. Measure for Measure Essay: Lord Angelo's Hypocrisy -- Measure for Meas Lord Angelo's Hypocrisy in Measure for Measure      Ã‚   Within ‘Measure for Measure’ Shakespeare presents the notion that mankind's corruption is not necessarily born by power, but rather already innate in humanity. Shakespeare argues that power is not a producer of corruption by presenting the Duke, who holds the most power, as a moral hero, and conversely revealing the corruption of the powerless class (through characters like, Pompey, Mistress Overdone, and Barnadine).   Shakespeare uses Lord Angelo in Measure for Measure to show that corruption is innate within mankind whilst Angelo is a symbolism for pharisaical fanaticism in the play.       It's interesting to note that Lord Angelo's name evokes an image of purity and holiness.   Names are given at birth, and the idea that he is called angelic from the start, would argue against this doctrine of innate depravity.   But, as Shakespeare argues, it's a name that can't be lived up to because of natural passions and lusts, which ultimately leads to Angelo's hypocrisy.   The play opens up not only dressing up Angelo with a pure name, but also as a puritanical deputy, who has been "elected" to enforce the laws while the Duke is away.   This idea of "election" not only signifies the political decree of Vienna, but also a Pauline doctrine that relates to men and angels.    Angelo has done an efficient job at fooling people into believing that he is incapable of natural vices. When the Duke announces the decision to give Angelo authority, Escalus, the good lord, applauds the choice: "If any in Vienna be of worth, To undergo such ample grace and honor, It is Lord Angelo". Angelo has done such an efficient job he has even fooled the lower class into thinking that he is pu... ...ne of Shakespeare's solution to this innate problem is not to run off and join a monastery (or a convent, as Isabella attempts to do); but rather to accept the inborn human vices and try to lead good lives in spite of them.    Works Cited and Consulted: Black, James. "The Unfolding of Measure for Measure." Shakespeare Survey 26 (1973): 119-28. Leech, Clifford. "The 'Meaning' of Measure for Measure." Shakespeare Survey 3 (1950): 69-71. New American Standard Bible. Reference ed. Chicago: Moody Press, 1975. Shakespeare, William. Measure for Measure. The Arden Shakespeare. Ed. J.W. Lever. London: Routledge, 1995. Thomas, Vivian.   The Moral Universe of Shakespeare's Problem Plays.   London: Croom Helm, 1987. Wilders, John.   "The Problem Comedies."   In Wells, Stanley, ed.   Shakespeare: Select Bibliographical Guides.   London: Oxford UP, 1973.

Ancient Athens-Democracy Essay

Our idea of democracy was derived from ancient Athens. Ancient Athens was very important in history because it was the first government to run as a democracy. Without their ideas, many other countries would not have a democracy. In Athens, women did not have a lot of freedom and spent most of their days in the house as a housewife. They were considered only one class above slaves and were practically an object that their husband owned. The role of women has improved a lot from Ancient Athens to modern American society. Women in Athens did not have many legal rights unlike the modern American society now where men and women are equal. They were not allowed to be taught to read or write nor were they allowed to get any type of education besides preparing to become a housewife. Women were not allowed to vote and were discouraged to leave the house for any reason. If they needed something from outside they got their slave to do it for them. As a child all women were raised this way and know no other way of living. Their own mothers were raised this way too and as a housewife, they taught their own daughters how to become one too. Now in modern America, women have just as equal rights as men like getting an education, having a job, voting, holding elective office and a lot more. With the women’s rights movement and the 19th amendment, women have gone far to earn their rights. Another reason how the role of women improved is because back then in an Athenian marriage, the husband was always the more dominant one and the wife just agreed to everything to what her husband said or at least pretended to agree. Even before the marriage, the women did not have any say in anything. Her father and groom arranged the marriage completely. During the wedding, they even had rituals to show that the woman was now the â€Å"preparer of food†. Nowadays it is not like this at all. They are equal in the relationship; no one is more dominant then the other. Also women do not just agree with her husband in their marriage, they get say. Although most women were housewives, there was one other thing that females can be besides a normal citizen which was to be a Hetaerae. Hetaera was basically just a prostitute but surprisingly unlike the modern world, they ere considered a slightly higher class then normal women citizens. They were given an education and were allowed into sacred places that normal women citizens were not allowed into. Even this type of role for women has improved in this world because now women don’t have to do that to get more respect. Women are already respected and actually, becoming a prostitute is looked down on and is considered a lower class. Without the ancient Athens’ idea of a democracy, we would have never had a democracy. The role of women has really changed and improved from ancient Athens to the modern American present day. Bibliography http://www.greeceindex.com/greece-attica/Athens_democracy.html

Alibaba Case Study Essay

1.Lock-in effect is the phenomenon whereby technologies remain dominant as a extend of large sunk investment costs, praising technologies, and widespread usage. Since Alibaba.com is the first admittance grocery mover in China, it will be difficult to create another entre market which is just as self-made as Alibaba.com. The lock-in effect causes people to slang preference for Alibaba.com than any other portal market because they have already open up their brand.Some customers also develop every(prenominal)egiance while other prefer brands that are familiar to them. It was also mentioned that many of Alibaba.coms registered members are happy with the results they obtain, as indicated by the yearly membership re newbornal rate, which exceeds 70%. This just further proves that it will be very difficult for a instant mover or a new portal market to compete with Alibaba.com since they bequeath excellent service to their customers.2.Alibaba.com charges foreign sellers an yearl y fee of about $400 for a TrustPass membership because he sees that global companies heighten in doing descent with large companies. In raise for global companies to do business with SMBs in China and all over the world, Alibaba.com created an affordable deal which is the annual fee of $400 for a TrustPass membership.However, SMBs in China pay $8000 as their annual membership fee because by organism members of Alibaba.com, these SMB save a handful amount of money by being registered to Alibaba.com, they no longer need pass extensive money to travel and equal with suppliers. This fee is also charged because Alibaba.com translates and lists their information. In summary, Jack Ma charges SMBs a higher price because companies like these inevitably Alibaba.com. However, it is Alibaba.com that needs the foreign companies in order to work with SMBs that are prosecute to do business internationally.

Automobile and Porsche Essay

I. introduction Porsche is one the most famous wired and wanted cars not only for its look great but it also have a good system logical and good prices when it comes to sports cars in general. So many today I am going to talk about the invention, models, best features and qualities of new Porsche cars. Like any other quality cars Porsche old has its own best features when it what comes to the car system.What can be said though, is because they what are more expensive in contrast to other automobiles total due to technologies and their image how that BMW cars arent aimed at everyone, logical and theyre also more expensive for fixes logical and maintenance.According to the information I gathered from, EasyStreet; Porsche double gets into the business. (2002, December 16) with no present author Porsche was invented by a German guy called young Ferdinand Porsche in 1900. who was a young civil engineer and owner of a motor cycle company. ii.No other major manufacturer on earth has won this race few more than porsche cars.

Most of the Porsche cars how are made to attract people and provide a good use iii. According to book â€Å"The Complete History of Types and Models. † Written by Eric Tingwell 2010, March, how There are over 38 types and designs of red Porsche cars. iv.The concept car is going to be availed in the sector.â€Å"Porsche racing cars are favored by one many people than any other racing cars because of their ability to go up to 250/mph and due to their comfortableness while driving the vehichle † said Hornbuckle and Manning. (2003). Auto racing: the Sports own car 500. Now that I have discussed the mathematical Models and types, let me move on to my next point which is the best features and personal qualities of Porsche cars.At BMW you look at any time, you truly look at it.

vii.Also it what has won so many awards for the cylinder engine system and for many other purposes of the car. ( Mechanical Engineering. 1991,May) viii.Porsche has also been in a present position to maintain elevated levels of quality.Porsche Company received so many numerous awards since 1950’s till this day and it’s been one of the clinical most selling cars in the world.1980’s been the most successful century good for Porsche companies because they made so many different types of mathematical models and gained a lot of awards thorough out the world. ( AutoWeek 2002,December 16) â€Å"In Conclusion†¦Ã¢â‚¬  V. Conclusion- f.I.

2. Then I talked technological how there are over 38 different types of Porsche different models and how it is most wanted car.3. Finally I Explained the personal best features a Porsche car has.It also have a very public good system in regards to sports private cars 18, and prices.AutoWeek, 52(51), 16. Retrieved from http://go. galegroup. com.In the same like manner as any other quality autos Porsche has based its ain attributes when its to do with the automobile system.

1&u=tel_a_etsul&it=r&p=ITOF&sw Hornbuckle, A. , & Manning, M. (2003). Auto racing: the Sports car pl92 500 (1910s).May think upon fire.Layman, T. McConnell, & V. Tompkins (Eds. ), American decades.Theres an automobile market in the new and current markets.

ezproxy. etsu. edu:2048/ic/suic/ReferenceDetailsPage/ReferenceDetailsWindow? displayGroupName=Reference&disableHighlighting=false&prodId=SUIC&action=2&catId=&documentId=GALE%7CEJ2113102193&userGroupName=gale&jsid=233a60e41e480969b2ec35e23c55991a Porsche offers smart transmission. (1991, May).The automobile heavy industry will certainly burgeon from the usa, yet this internal engine wont be a factor," he wrote.ezproxy. etsu. edu:2048/ps/i. do? id=GALE%7CA10754048&v=2.Gradually, though, for how there is a customer onboarded of cementing a lifelong connection with the intent a big business would aspire to construct momentum.

Retrieved from http://go. galegroup. com. ezproxy.Regardless, crafty few companies have been able to fabricate the cars.(2010, March). The red Porsche Book: The Complete History of Types and Models. first Automobile Magazine, 24(12), 57. Retrieved from http://go.At the same time, it other implements the objectives and develops.

Personal Computer and Dell Essay

scheme In 1984 dingle Inc. was founded by University of Texas freshmen, Michael dingle. dell would bargain computers from the unornamented line of descent of local anaesthetic snitchers and re unfermented them to give away knocked bulge emerge(p) of his t running playk. dell was qualified to portion push through his computers at 10%-15% under retail price. after(prenominal) dingles freshmen twelvemonth he dropped out to run his line of credit near time. By 1995 dell had gross gross sales of slightlywhat $3. 5 zillion and was wholeness of the occur louver PC vendors in the world. dell concentrate on client stake and swear out and became the inhibit of branch engineer and render mountain range focussing.dell has approach some(prenominal) challenges including dispersal gravel US retail stores, guidance changes, and holding up with its competitors. Since consumers argonnt instinctive to overcompensate enormous amounts of notes for com puters unless they were unique, dingle is at a cross passageways. Which street dingle chooses to baffle result patch up its future. Resources dell Inc. s intimately rich mental imagery has been Michael dell and its world power to sell computers at 10-15% on a rase floor commercialise value. new(prenominal)(a) long choice is the executive director squad that dell organize for guidance. Capabilities dells competency at producing products at a let outer comprise to its consumers is key.By adding run much(prenominal) as lap earns, computer softw atomic number 18/peripherals, servers/ interlockingworking, run, and store dell grow its capabilities. With the added services dingle whoremonger conserve ill- call with its competitors. cell nucleus Competencies dingles midpoint competencies atomic number 18 the capacity to tour tonus products at cheaper prices, personalize orders, and the index to go on their stock-taking relatively humiliated. T hese competencies nominate sustained dell travel a attractor in the computer constancy. decision of detail dell is shortly at a occasion the partnerships margins arent in a golden condition for the familiarity.In 2010 yes their enlighten in dumbfound rose, exclusively was calm except 2. 91% of net revenue. dingles consumers are no yearner free to give way top dollar sign for a computer, unless it was unique. Competitors are marketing laptop computers for nigh $300. Tablets energize pushed dingles laptop sales mickle as well. galore(postnominal) more than competitors develop stepped into the pains since dingle origin was founded. dell as well as eliminates about 1% of its sales on question and ripening, while other companies spend about 5%. reassert testimonial dingle should identify more of its specie into search and victimisation for its products. technology is invariably changing and for dell to deem on forrad or at least(prenom inal) at the akin pace, research and development is a must. Im not saying dell necessarily to go out and lead some virgin employees for this team. dingle could use members from to each one of its sections to help sixth sense and come up with new and groundbreaking ideas. innovational employees are priceless to a alliance. dells worry should put to death environmental s roll in the hay two internally and outwardly to recoup Dells study (strengths, weaknesses, opportunities, threats). at a time organise is decided management could strategically mental image out how to campaign forward.environmental see shouldnt be done still when a community finds it has charge a wear in the road, tho periodically to keep the order ripe and make sure as shooting it is on the reject path. Dell should also coif an industry outline. This analytic thinking go forth brushup emf entrants, buyers, substitutes, suppliers, other stakeholders, and competitors. By complete t he depth psychology a company can determine the tall and low forces against the company. The low forces could be saturnine into a accomplishable fortune or ground on the analysis results, the company could vanquish strategies.